Wholesale Hand and Foot Protection: Fire Gloves, Safety Boots & PPE

Our comprehensive range includes PPE gloves, PPE boots, proximity gloves, wildland gloves, technical rescue hand protection and emergency response footwear for fire departments, industrial teams and government procurement.

hand protection and boots are not safer because they are thicker. The right material, reinforcement, toe cap and tread must match the heat, cut, chemical, ground and handling task, including safety shoes, including protective footwear, including nitrile examination gloves, including chemical resistant boots, including waterproof safety boots, including steel toe safety shoes, including steel toe boots, including medical exam gloves, including industrial safety footwear, including industrial industrial industrial work gloves, including leather work gloves, including wholesale hand protection. This wholesale page compares 9 product lines — each with real materials, applicable standards, sizes and bulk packing — so fire departments, disaster relief agencies, government buyers and industrial safety programs can build a complete, compatible hand and foot protection PPE system with fire gloves and safety boots.

Contents: Products | Comparison | Standards | Scenarios | Interfaces | Sizing | Order Setup | Bundles | Key Points | Care | Certs | Packing | Quality | FAQ

30-Second Selection Guide for hand protection gloves, Safety Boots and PPE

Selecting the right hand and foot protection starts with understanding your work environment, hazard type, and certification requirements. This quick guide helps procurement processs match hand protection and safety footwear to specific use cases across fire, industrial, medical, and tactical operations., including safety shoes, including protective footwear.

Answer these three questions to narrow down the product type, then check the specifications below.

✅ Explore Water Rescue Life Jackets for Bulk Procurement selections, get bulk rescue life jackets and institutional life jackets from reliable water rescue life jacket supplier, to fulfill large‑volume water‑safety procurement requirements.

Our Hand and Foot Protection — 9 Product Lines: Firefighter Gloves, Chemical Resistant hand protection and Firefighter Boots

Our hand and foot protection portfolio covers nine specialized product lines designed for different hazard levels and working conditions. From firefighter turnout gloves to chemical-resistant boots, each category is configured to meet industry-specific safety standards and procurement specifications.

Our inventory includes powder free nitrile hand protection for medical environments, bulk safety hand protection hand protection for large procurement orders, and a full range of PPE gloves designed to complement any personal protective equipment gloves program for industrial and emergency response teams.

Our comprehensive range includes nitrile examination hand protection for medical settings, industrial safety footwear for manufacturing environments, medical exam gloves wholesale for healthcare procurement, waterproof safety boots for wet conditions, and steel toe safety shoes for construction sites.

Below are 9 product lines, each with production-verified parameters. Custom sizes, colours and marking are available for wholesale orders.

Structural Firefighting Gloves

Heavy-duty hand protection for structural fire and high-heat rescue. Top-grain leather with heat-resistant lining, reinforced thumb crotch and extended wrist cuff.

Material: Shell: Top-grain cowhide palm, Kevlar-stitched, heat-resistant back, Lining: Thermal insulating liner, moisture barrier

Standard & Performance: Standard: EN 659 / NFPA 1971, Heat: Contact heat 100°C, convective heat protection, Features: Reinforced thumb crotch, hook-and-loop wrist, extended cuff over coat sleeve, flame-resistant stitching

Dimensions: Length: 28 cm standard or 37 cm extended cuff, Weight: Approx. 428 g per pair

Options: Colours: Black, brown, Sizes: S, M, L, XL

Packing: 1 pair per bag, labelled by size

Firefighting Heat-hand protection gloves

High-visibility heat-resistant hand protection for fire support and low-light operations. Silicone-dotted palm for grip with knitted thermal lining.

Material: Shell: Aramid outer shell, silicone-dotted palm, knitted thermal lining

Standard & Performance: Standard: EN 659 / NFPA 1971, Heat: Contact heat up to 250°C for short-duration handling (specific duration per test report; EN 659 standard contact heat is 100°C/15s), Features: Bright orange for visibility, yellow-green reflective trim, dotted palm grip, extended cuff

Dimensions: Length: Approx. 30 cm, Weight: Approx. 250 g per pair

Options: Colours: Orange with reflective trim, Sizes: One-size-fits-most (check hand circumference for wholesale orders)

Packing: 1 pair per bag

Heavy Rescue Gloves

Impact-hand protection hand protection for breaching, vehicle rescue and heavy handling. Segmented TPR knuckle protection with cut-resistant palm.

✅ Browse our full lineup of Water Rescue Equipment for Bulk Procurement, source bulk water rescue equipment and wholesale rescue equipment via qualified water rescue equipment supplier, ideal for government, NGO and humanitarian institutional bulk‑order projects.

Material: Palm: Synthetic leather with Kevlar cut-resistant layer

Standard & Performance: Standard: EN 388 (cut level 2-4) / EN 13594, Cut: Level A2-A4 (ANSI/ISEA 105), Features: Ribbed wrist, pull tab, touchscreen-compatible fingertips, reinforced thumb crotch

Dimensions: Length: Approx. 25 cm, Weight: Approx. 180 g per pair

Medical facilities often prefer powder free nitrile gloves to reduce allergen exposure, while industrial teams select durable PPE gloves that integrate seamlessly with existing personal protective equipment protocols.

Options: Colours:

Proper hand protection selection requires matching glove material to specific workplace hazards and exposure durations.

>Packing: 1 pair pe bag

Lightweight high-dexterity hand protection for technical rescue, rope work and sharp-edge handling. HPPE cut-resistant liner with nitrile-coated palm.

Material: Liner: HPPE / Dyneema cut-resistant fibre, Coating: Nitrile micro-foam or sandy finish

Standard & Performance: Standard: EN 388 (cut A5-A7) / ANSI/ISEA 105, Cut: Level A5-A7 (highest cut protection), Features: Double

Safety footwear must meet industry certification standards to ensure adequate protection against impact and compression injuries. thumb reinforcement, hook-and-loop wrist, touchscreen fingertips, breathable knit back

Dimensions: Length: 18-19 cm, Weight: Approx. 100 g per pair

Options: Colours: Grey, black, Sizes: S, M, L, XL

Packing: 1 pair per bag

Chemical-Resistant Gloves

Long-cuff nitrile gloves for chemical handling, decontamination and laboratory work. Diamond-textured palm for wet grip.

Material: material: Nitrile rubber (latex-free)

Standard & Performance: Standard: EN 374 (chemical protection) / EN 420, Chemical: Acids, alkalis, solvents (refer to compatibility chart for specific chemicals), Features: Diamond palm texture, straight cuff for donning, rolled beaded cuff

Dimensions: Length: 33 cm extended cuff, Thickness: 0.38 mm palm, 0.45 mm fingertip

Options: Colours: Blue, green, purple, Sizes: XS, S, M, L, XL

Packing: 1 pair per bag, 50 pairs per carton

Disposable Medical Gloves

Powder-free examination gloves for medical emergency, institutional and industrial use. Latex, nitrile or vinyl options.

Material: material: Natural rubber latex, nitrile or PVC (specify at order)

Standard & Performance: Standard: EN 455 (medical) / EN 374 / ASTM D6319, Features: Beaded cuff, smooth or textured fingertip, ambidextrous

Dimensions: Thickness: 0.08-0.12 mm

Options: Colours: Natural white, blue, black, Sizes: S, M, L, XL, Powder: Powder-free standard; powdered available on request, Sterility: Non-sterile standard; sterile EO available

Packing: 100 pieces per box, 10 boxes per carton

Medical glove material comparison: 100 pieces per box, 10 boxes per cartonLatex offers best fit and dexterity but causes allergies; nitrile is latex-free, puncture-resistant and suitable for most medical use (most popular for wholesale orders); PVC/vinyl is lowest investment for light-duty examination but less stretch and durability. Specify material at order — they are not interchangeable.

High-cut protective boots for structural firefighting and rescue. Composite or steel toe cap with puncture-resistant midsole and heat-resistant outsole.

Material: Upper: Moulded rubber or stitched leather/rubber composite

Standard & Performance: Standard: EN 15090 / NFPA 1971, Heat: Outsole contact heat 250°C, Toe cap: Steel or composite, impact 200J / compression 15kN, Midsole: Kevlar or steel puncture-resistant, minimum 1100N, Outsole: Heat-resistant rubber, deep tread, SRC slip resistance, Features: Zipper and lace closure, reflective trim, padded collar, moisture-resistant lining (drainage channels on wildland models only)

Dimensions: Shaft: 25-35 cm, Weight: 2.0-2.8 kg per pair

Options: Colours: Black with yellow trim, Sizes: EU 38-47 (US 6-13)

Packing: 1 pair per box with shape support

For detailed boot specifications, sizing charts and boot-only comparison, see our Firefighter Boots page.

Wildland, Station-Duty and Tactical Boots

Three boot styles for different duties: wildland fire boots for terrain, station-duty shoes for daily wear, tactical boots for mixed ground.

Material: Upper: Full-grain leather with nylon panels (wildland/tactical); leather/mesh (duty)

Standard & Performance: Standard: EN ISO 20345 / ASTM F2413, Slip: SRA / SRB rated, Toe cap: Composite or steel (optional on wildland/tactical), Outsole: Rubber or Vibram-style lug sole, deep tread, Features: Lace-up closure, waterproof lining option, cushioned midsole, shock-absorbing heel

Dimensions: Shaft: 15-20 cm (wildland/tactical); low-cut (duty), Weight: 1.2-1.8 kg per pair

Options: Colours: Black, brown, olive, Sizes: EU 38-47 (US 6-13)

Packing: 1 pair per box

Chemical Glove and Boot-Cover Ensemble

Complete chemical protection set with butyl-rubber hand protection and matching boot covers. Designed for use with Level A/B chemical suits.

Material: Glove: Butyl rubber, 0.35 / 0.5 / 0.7 mm thickness options, Boot cover: Butyl rubber or multi-layer composite film

Standard & Performance: Standard: EN 374 / EN 943 (chemical suit compatible), Chemical: Aldehydes, ketones, esters and many organic chemicals (refer to compatibility data), Features: Diamond grip palm, wide boot-cover opening, integrated with chemical suit sleeves/legs

Dimensions: Glove length: 33-40 cm extended straight cuff

Options: Colours: Orange, grey, Sizes: Gloves: S-XL; Boot covers: S-XL (match shoe size)

Packing: Gloves by pair, boot covers by pair, kit code for combined orders

Quick Comparison: 9 Wholesale Hand and Foot Protection Including Cut Resistant hand protection and Heat Resistant Gloves

Comparing hand and foot protection options side by side helps buyers understand the trade-offs between material, protection level, comfort, and investment. This comparison section covers nine core product lines with key specifications for fast decision-making.

Use this table to compare all lines at a glance. Click any product name for full details.

• Structural Fire Gloves: Heat, flame, abrasion, Top-grain cowhide + Kevlar, EN 659 / NFPA 1971, ~428g/pair

Regular inspection of protective hand protection and boots extends service life while maintaining optimal safety performance.

l firefighting leather gloves versus heavy rescue gloves with TPR protection" style="max-width:100%;height:auto">

• Fire Heat Gloves: High heat, visibility, Aramid + silicone dots, EN 659 / NFPA 1971, ~250g/pair
• Heavy Rescue Gloves: Impact, cut, handling, Synthetic leather + TPR, EN 388 / EN 13594, ~180g/pair
• Technical/Cut Gloves: Sharp edges, dexterity, HPPE + nitrile coating, EN 388 A5-A7, ~100g/pair
• Chemical Gloves: Chemicals, decon, Nitrile rubber 0.38mm, EN 374 / EN 420, ~150g/pair
• Disposable Medical Gloves: Biological, examination, Latex/nitrile/PVC, EN 455 / EN 374, 5-10g/piece
• Structural Fire Boots: Heat, impact, puncture, Rubber/leather + steel toe, EN 15090 / NFPA 1971, 2.0-2.8kg/pair
• Wildland/Tactical Boots: Terrain, long distance, Leather + nylon + rubber sole, EN ISO 20345, 1.2-1.8kg/pair
• Chemical Glove+Boot Set: Chemical permeation, Butyl rubber 0.35-0.7mm, EN 374 / EN 943, varies

Protection Standards Reference for Work Gloves, Nitrile hand protection and Safety Footwear

Understanding protection standards is critical for compliant procurement of hand and foot protection equipment. Different industries require different certification levels, and this reference explains the key standards that apply to work gloves, safety boots, and specialized protective footwear.

• EN 659 (EU, Firefighting gloves): Heat, flame, abrasion, seam strength
• NFPA 1971 (USA, Firefighting gloves & boots): Heat, flame, thermal protective performance
• EN 388 (EU, Mechanical risk gloves): Cut, abrasion, tear, puncture (A1-A9 cut scale)
• EN 13594 (EU, Motorcycle/rescue gloves): Impact protection, knuckle coverage
• ANSI/ISEA 105 (USA, Hand protection): Cut level A1-A9, puncture, abrasion
• EN 374 (EU, Chemical/microbe gloves): Chemical permeation, degradation, penetration
• EN 420 (EU, General glove requirements): Sizing, pH, hexavalent chromium, marking
• EN 455 (EU, Medical gloves): Sterility, barrier, sizing, shelf life
• EN 15090 (EU, Firefighting boots): Heat, impact, puncture, slip, water
• EN ISO 20345 (EU, Safety footwear): Toe cap 200J, slip, antistatic, energy absorption
• ASTM F2413 (USA, Safety footwear): Toe impact/compression, puncture, electrical
• EN 943 (EU, Chemical suit accessories): Gas-tight suit, gloves, boot covers

Scenario Selection: Fire Department Gloves, Industrial Safety Gloves, Hospital hand protection and Hazmat Gloves

Different operational scenarios require different hand and foot protection configurations. Fire departments need heat-resistant hand protection and structural boots, while industrial teams require chemical-resistant options, and medical facilities need examination-grade hand protection.

1. Municipal Fire Department hand protection and Firefighter Boots

Start with: Structural Firefighting Gloves (EN 659, leather, extended cuff) + Structural Fire Boots (EN 15090, steel toe, SRC grip). One pair per firefighter plus reserve. Confirm glove-cuff overlap with coat sleeve and boot-trouser interface. Add Fire Heat hand protection for high-heat support operations.

2. Urban Search and Rescue Team with Emergency Rescue Gloves

Start with: Heavy Rescue Gloves (TPR knuckle protection, cut A2-A4) + Technical Cut Gloves (A5-A7 for glass/metal) + Tactical Boots (composite toe, lug sole). Two glove types per rescuer — heavy for breaching, cut hand protection for detailed work. Confirm touchscreen compatibility for communication devices.

3. Industrial Safety hand protection and Hazmat Response with Chemical Boots

Bulk procurement of hand and foot protection allows for investment optimization while ensuring consistent inventory levels.

4. Hospital hand protection and Disease Control Medical Gloves

Start with: Disposable Medical Gloves (nitrile powder-free, exam grade) + chemical gloves (nitrile, for cleaning/disinfection). Calculate daily consumption × reserve days. Nitrile preferred for latex-allergy staff. Sterile hand protection for surgical/procedure areas, non-sterile for general examination.

5. Wildland Fire Crew with Wildland Boots and Work Gloves

Start with: Fire Heat Gloves (high visibility, silicone grip) + Wildland Boots (leather/nylon, Vibram-style lug sole, 15-20cm shaft). Lightweight gear for long hikes and hot conditions. Ventilated boots preferred for all-day wear. Spare laces and insoles recommended.

6. Government PPE, Emergency Reserve and Disaster Relief Gloves (Multi-Hazard)

Start with: Mixed stock based on regional risk: 25% fire gloves, 20% rescue gloves, 15% chemical gloves, 15% disposable medical gloves, 15% fire boots, 10% tactical boots. Track glove and boot shelf life. Plan 3-5 year rotation for rubber/leather items. Store in cool, dry conditions away from direct sunlight.

Interface Compatibility: Tactical Gloves, Chemical Boots and Waterproof Work Boots with Protective Clothing

Hand and foot protection must work seamlessly with other personal protective equipment in the field. This section covers how tactical gloves interface with weapons systems, how chemical boots work with hazmat suits, and compatibility considerations for full-body PPE ensembles.

A complete protective ensemble only works if every piece connects properly. Use this checklist before ordering.

• Glove cuff ↔ coat sleeve: Glove cuff goes under coat sleeve; minimum 5cm overlap; sleeve covers wrist Common Mistake: Glove over sleeve leaves wrist exposed; sleeve too short
• Chemical glove ↔ suit sleeve: Glove inside or outside per suit design; tape or sealing ring at junction; double-glove for high risk Common Mistake: No seal; chemical enters at wrist; single glove only
• Boot top ↔ trouser hem: Trouser hem covers boot top; no gap at ankle; pants tucked or over boot Common Mistake: Pants ride up exposing ankle; boot too tall for pant length
• Chemical boot cover ↔ suit leg: Boot cover over suit leg; tape at junction; integrated with glove setup Common Mistake: Gap at calf; chemical enters; wrong size cover
• Double glove setup: Thin inner glove (nitrile) + thick outer glove (butyl/neoprene); change outer after contamination Common Mistake: Two thick gloves = no dexterity; same material both layers
• Boot sock layers: Fire boots sized for thick socks; allow 1-1.5cm toe room; test with actual duty socks Common Mistake: Boot too tight with thick socks; heel slip with thin socks

---

Sizing, Fit and Order Configuration for Wholesale Protective hand protection and Safety Boots

Proper sizing and fit are essential for hand and foot protection to perform as designed. This guide covers sizing charts, fit considerations, and order configuration options for wholesale procurement of hand protection hand protection and safety footwear.

Proper fit is the difference between protection and injury. Measure users before ordering, especially for hand protection and boots.

Glove Sizing

• Measure hand circumference: wrap tape around the dominant hand at the knuckles, excluding the thumb
• Measure hand length: from wrist crease to tip of middle finger
• Common sizes: S (18-19cm), M (19-20cm), L (20-21cm), XL (21-22cm)
• Check: fingertips should not be tight; thumb crotch should not pull; wrist cuff should overlap coat sleeve
• Fire gloves: may fit snugger due to thermal lining — allow for finger movement
• Disposable gloves: size up if between sizes for easier donning
• Dominant hand: measure the dominant hand — it is typically 0.5 size larger than the non-dominant hand
• Female users: women's hands average 1-2cm smaller in circumference; order extra S and M sizes for mixed teams

Boot Sizing

• Measure foot length: heel to longest toe, weight-bearing
• Measure foot width: widest part of the foot
• EU/US conversion: EU 38=US 6, 39=6.5, 40=7, 41=8, 42=8.5, 43=9.5, 44=10.5, 45=11, 46=12, 47=13
• Fire boots: size for thick socks; allow 1-1.5cm toe room
• Try on with: the socks you will wear on duty, walk on slopes and stairs
• Wide feet: check boot last width — not all brands offer wide options
• Typical ratio: EU 40:41:42:43:44:45 = 1:2:3:4:3:2 for adult teams

Below is a typical hand and foot protection order for a 50-person municipal fire department. Use as reference — actual mix depends on roles, shifts and reserve policy.

• Structural fire gloves (EN 659, leather, extended cuff): 60 pairs, Unit Weight 0.43 kg, Total Weight 26 kg
• Fire heat gloves (EN 659, aramid, orange): 30 pairs, Unit Weight 0.25 kg, Total Weight 8 kg
• Heavy rescue gloves (EN 388, TPR, cut A3): 30 pairs, Unit Weight 0.18 kg, Total Weight 5 kg
• Structural fire boots (EN 15090, steel toe, SRC): 55 pairs, Unit Weight 2.4 kg, Total Weight 132 kg
• Wildland boots (EN ISO 20345, composite toe): 20 pairs, Unit Weight 1.5 kg, Total Weight 30 kg
• Chemical gloves (EN 374, nitrile, 33cm): 100 pairs, Unit Weight 0.15 kg, Total Weight 15 kg
• Disposable medical gloves (EN 455, nitrile, M/L): 500 pieces, Unit Weight 0.007 kg, Total Weight 4 kg

Final quantities and delivery timing are confirmed per order. Request a custom quote for your specific team size and hazard profile.

Product Bundles and Procurement Guide

Bulk safety gloves are available for large-volume orders with customized packaging and volume pricing options to support high-volume procurement requirements. for Wholesale hand protection and Safety Footwear

Procuring hand and foot protection in bulk requires careful planning around bundle configurations, stock levels, and delivery schedules. This procurement guide helps buyers optimize their orders for investment efficiency and operational readiness.

For large orders, bulk safety hand protection gloves are available in customized packaging configurations with volume pricing to support high-volume procurement requirements.

These pre-configured bundles simplify ordering for common team types. All items can be adjusted to your size ratio and hazard profile.

• Fire Crew Standard Set
  Includes: Structural fire gloves (1 pair) + fire heat gloves (1 pair) + structural fire boots (1 pair) per firefighter
  Suitable for: Municipal fire departments, structural firefighting
• Rescue Team Set
  Includes: Heavy rescue gloves (1 pair) + technical cut gloves (1 pair) + tactical boots (1 pair) per rescuer
  Suitable for: USAR teams, vehicle rescue, technical rescue
• Hazmat Response Set
  Includes: Chemical gloves (2 pairs) + chemical glove+boot cover ensemble (1 set) + disposable nitrile gloves (box) per responder
  Suitable for: Hazmat teams, industrial decontamination
• Medical/Institutional Set
  Includes: Disposable nitrile gloves (case) + chemical gloves (for cleaning) per station
  Suitable for: Hospitals, clinics, disease control centres
• Government Reserve Kit
  Includes: Mixed: fire gloves 25%, rescue gloves 20%, chemical gloves 15%, medical gloves 15%, fire boots 15%, tactical boots 10%
  Suitable for: National/regional emergency stockpiles, disaster relief agencies

Use this checklist when preparing your specification or tender document.

1. Hazard type (heat/cut/chemical/biological) — Determines glove/boot material and standard
2. Applicable standard (EN/NFPA/ASTM) — Standards define test methods and pass/fail criteria
3. Cut level for gloves (A1-A9) — Higher level = more cut protection but less dexterity
4. Chemical compatibility list — Wrong material = chemical breakthrough
5. Toe cap type (steel vs composite) — Steel is heavier; composite is lighter and non-conductive
6. Slip resistance level (SRA/SRB/SRC) — SRC passes both wet tile and steel-glycerin tests
7. Glove-cuff and coat-sleeve overlap — Gap at wrist = burn/injury risk
8. Boot-trouser interface — Pants must cover boot top, not gap
9. Size distribution for users — One-size or average-size ordering causes fit failures
10. Shelf life and storage conditions — Rubber and latex degrade over time

Compatibility between gloves, boots, and other PPE components is essential for complete worker protection in the field.

Different operational environments require specialized hand protection configurations tailored to specific hazard profiles.

Care, Maintenance and Retirement of Firefighter Turnout Gloves, Cut Level hand protection and Tactical Boots

Proper care and maintenance extend the service life of hand and foot protection equipment while ensuring ongoing safety performance. This section covers inspection routines, cleaning procedures, and retirement criteria for firefighter turnout gloves and other reusable protective gear.

Cleaning and Maintenance by Type

• Leather fire gloves: Air dry after use; clean with mild soap and water; do not machine wash; treat leather periodically
• Rescue/cut gloves: Machine washable (check label); air dry; inspect TPR and coating after each use
• Chemical gloves: Rinse with water after chemical exposure; inspect for pinholes before each use; replace if swollen or discoloured
• Disposable gloves: Single-use only; do not wash or reuse; change between patients/tasks
• Fire boots: Rinse after use; remove insoles to dry; inspect tread, seams and toe cap; treat leather
• Wildland/tactical boots: Clean with brush and water; dry naturally (not near heat); re-waterproof periodically

When to Retire

• hand protection with cracked, hardened or melted leather
• hand protection with torn seams, holes or worn-through palm
• Chemical hand protection with pinholes, swelling, tackiness or colour change
• Disposable gloves past expiry date or with broken seal
• Boots with cracked soles, separated upper, worn tread or deformed toe cap
• Boots that no longer pass slip resistance (smooth tread)
• Any gloves or boots that failed a fit or function check
• Fire gloves after direct flame exposure or heat damage
• Rubber/leather items past supplier shelf life (typically 3-5 years)
• Antistatic gloves/boots that no longer pass surface resistance test (below 10⁶ or above 10⁹ ohms)

Storage conditions: Store all rubber and latex items at 5-25°C, below 70% relative humidity, away from direct sunlight, ozone sources and chemical fumes. Leather items should be conditioned periodically. Do not store gloves or boots folded or compressed for long periods.

Certifications for Medical Examination Gloves, Chemical Resistant Boots and OEM Gloves

Medical and healthcare settings require specific certifications for hand protection, including examination gloves and infection control protocols. This reference covers the key standards that apply to medical examination gloves, chemical-resistant options, and healthcare-grade protective footwear.

We support third-party test reports based on your project requirements. Not every certificate applies to every product — confirm availability for your selected model before shipment.

Certifications: EN 659, NFPA 1971, EN 388, EN 13594, ANSI/ISEA 105, EN 374, EN 420, EN 455, EN 15090, EN ISO 20345, ASTM F2413, EN 943, ISO 9001:2015, SGS Test Report, CE Marking, Certificate of Origin

Packing, Container Loading and Quality Inspection for Wholesale hand protection and Safety Boots

Wholesale procurement of hand and foot protection requires careful attention to packing configurations, container loading efficiency, and quality inspection protocols. This section covers export packaging standards, container loading calculations, and pre-shipment quality checks.

Standard Packing

• Durable gloves: 1 pair per labelled bag, cartons by size
• Disposable gloves: 100 pieces per box, 10 boxes per carton
• Chemical gloves: 1 pair per bag, 50 pairs per carton
• Fire boots: 1 pair per box with shape support and moisture protection
• Wildland/tactical boots: 1 pair per box
• Chemical ensemble: hand protection and boot covers packed separately under kit code
• Custom labels, barcodes and carton marks available

Loading Reference

• Fire gloves: ~2000 pairs per 20ft GP
• Disposable gloves: ~500000 pieces per 20ft GP
• Chemical gloves: ~5000 pairs per 20ft GP
• Fire boots: ~300 pairs per 20ft GP
• Wildland/tactical boots: ~500 pairs per 20ft GP
• Mixed orders: optimized loading plan provided

Loading figures are estimates for standard packing. Mixed orders are optimized to maximize container use.

YRF Textile produces and exports hand and foot protection alongside our other textile and emergency supply lines. Our quality process has four stages:

1. Incoming material check: Leather thickness, rubber hardness, cut-fibre tensile strength, toe cap impact test verified
2. In-line assembly check: Glove stitching, seam strength, coating uniformity, boot sole bonding, toe cap placement monitored
3. Finished product testing: Cut test (gloves), heat test (fire gloves/boots), slip test (boots), chemical permeation test per batch
4. Pre-shipment sampling: AQL 2.5 sampling for volume orders; full inspection available on request

We support third-party inspection (SGS, BV, or your own inspector) before shipment — arrange the scope and timing in advance.

Training workers on proper use and care of protective equipment maximizes the effectiveness of safety investments.

Related Wholesale PPE, Rescue hand protection and Emergency Rescue Gloves Products

Hand and foot protection is often procured alongside other personal protective equipment for complete operational readiness. This section highlights related PPE categories including rescue gloves, emergency response gear, and complementary protective equipment. Our PPE gloves range complements these product lines for complete protection coverage.

Our PPE gloves collection includes specialized options for fire rescue, industrial safety, medical environments, and tactical operations, all designed to work as part of a complete personal protective equipment system.

Body Protective Clothing — Fire, chemical and medical suits to match your hand protection and boots.

Head & Respiratory Protection — Helmets, SCBA and respirators for complete ensemble.

Fire Safety Equipment — Complete fire ensembles and accessories.

Emergency Survival Gear — Tools, kits and accessories for disaster preparedness.

Relief Tents & Tarps — Shelter systems for decontamination and emergency response.

Emergency Lighting — Portable lights and headlamps for rescue operations.

Body Protective Clothing — Complete protective suits to pair with your hand protection and boots.

Head and Respiratory Protection — Helmets, masks and respirators for full PPE coverage.

FAQ About Wholesale Hand and Foot Protection

Our wholesale gloves program supports bulk orders with flexible packaging, volume pricing, and customized configurations for procurement teams sourcing hand protection and safety footwear at scale., hand protection gloves and Safety Boots Supplier

This FAQ covers common questions about wholesale hand protection, safety shoes, protective footwear, nitrile examination gloves, chemical resistant boots, waterproof safety boots, steel toe safety shoes, medical exam gloves, industrial safety footwear, leather industrial work gloves, and bulk safety hand protection for procurement processs.

Frequently asked questions about wholesale hand and foot protection cover sizing, certification, customization, project timelines, and procurement configurations. These answers help buyers make informed decisions when sourcing hand protection hand protection and safety footwear in bulk.

Q: Can firefighting, rescue and cut gloves replace one another?

A: No. Fire gloves (EN 659) protect against heat and flame but are bulky. Rescue gloves (EN 388 with TPR) protect against impact but not high heat. Cut gloves (A5-A7) protect against sharp edges but may not resist heat. Match the glove to the specific hazard — many teams carry two or three types.

Understanding the right hand protection and safety footwear for your team ensures compliance and worker safety across all operational environments.

Q: How do I build a glove size ratio for my team?

A: Measure hand circumference (around knuckles) and hand length for each user. A typical adult team ratio is S:M:L:XL = 1:3:4:2. Fire gloves may run smaller due to thick lining — size up if between sizes. Always test actual tool grip and finger flexion before bulk ordering.

Q: Why is chemical identity required for chemical gloves?

A: No single glove material resists all chemicals. Nitrile handles acids and oils well but breaks down with certain solvents. Butyl rubber resists more chemicals but is stiffer. Provide the chemical name, concentration, temperature and contact time — we match the material and thickness from our compatibility data.

Q: What does cut level A7 mean?

A: ANSI/ISEA 105 cut levels A1 through A9 measure resistance to sharp edges using a TDM-100 test. A7 means the glove withstands approximately 1500-2000 grams of cutting force — suitable for handling broken glass, sheet metal and sharp debris. Higher cut levels generally mean less dexterity.

Q: How do structural-fire and wildland boots differ?

A: Structural fire boots (EN 15090) have heat-resistant outsoles (250°C contact), steel/composite toe caps and puncture midsoles — they are heavy (2-2.8kg) for building fire. Wildland boots (EN ISO 20345) are lighter (1.2-1.8kg) with lug soles for hiking terrain and ankle support for long distances. They do not have the same heat resistance as fire boots.

Q: Steel toe or composite toe — which is better?

A: Steel toe caps meet 200J impact and are durable, but they are heavier (about 200g per boot) and conduct cold/heat. Composite toe caps (fibreglass/kevlar) are 30% lighter, non-conductive and do not set off metal detectors. Both meet the same impact standard. Choose composite for airport/security work or all-day comfort; steel for heavy industrial use.

Q: What is SRC slip resistance?

A: SRC is the highest slip resistance rating under EN ISO 20345. It means the boot passes both SRA (ceramic tile with detergent solution) and SRB (steel floor with glycerin) tests. For fire and rescue work on wet, oily or uneven surfaces, SRC is recommended.

Q: How do powder-free, sterile and examination gloves differ?

A: Powder-free means no cornstarch lubricant (reduces allergy risk). Sterile means individually wrapped and gamma/EO sterilized (for surgical use). Examination (non-sterile) is for general medical use. These are separate attributes — a glove can be powder-free but non-sterile, or sterile but powdered. Specify exactly what your use requires.

Q: How should gloves interface with protective sleeves?

A: Fire gloves should extend under the coat sleeve with at least 5cm overlap — the sleeve covers the glove cuff, not the other way. Chemical gloves may go inside or outside the suit sleeve depending on the suit design; tape or sealing rings are used at the interface. Always test the overlap after arm movement (raising arms, bending elbows).

Q: What is the shelf life of rubber and leather gloves/boots?

A: Natural rubber latex: 3-5 years from production. Nitrile: 5 years. Leather: 5+ years with proper care. Fire boots (rubber): 5-7 years. All assume storage in cool (5-25°C), dry (below 70% RH) conditions away from sunlight and ozone. Inspect before each use regardless of age.

Q: Can logos and markings be added to gloves and boots?

A: Gloves can have printed or embossed logos on the cuff (keep palm and finger grip areas clear). Boots can have logos on the shaft or tongue. Reflective markings on fire boots are standard. Provide authorized artwork and position — we confirm markings do not cover safety-critical areas before production.

Q: What should receiving inspection cover?

A: Check quantity, size ratio, material, stitching/coating, reinforcement, toe cap, midsole, outsole tread, labels and packaging. For gloves: check pair matching, seam integrity, cuff length. For boots: check toe cap shape, sole bonding, tread depth, sizing labels. Record all findings per batch.

Q: What is the typical project timelineline?

A: Standard in-stock items ship within days. Production orders typically take 15-30 working days depending on product, quantity and customization. Certified fire hand protection and boots may require additional testing time. Final timing is confirmed per order.

Q: What information is needed for a quotation?

A: At minimum: hazard type, product type, estimated quantity, size distribution and applicable standard. To speed up the quote, also include: cut level (gloves), toe cap type (boots), chemical list (chemical gloves), material preference, customization needs and project timelineline. The more detail, the fewer follow-up questions.

Q: Can I mix sizes in one bulk order?

A: Yes. Most bulk orders include a size ratio rather than one uniform size. Provide your team's hand/foot measurements and we calculate the optimal ratio. Typical adult glove ratio S:M:L:XL = 1:3:4:2; boot ratio EU 40:41:42:43:44:45 = 1:2:3:4:3:2. Mixed-size orders ship in labelled cartons by size.

Q: What warranty do you offer?

A: Production defects in materials and workmanship are covered under our standard quality guarantee. We replace defective units confirmed by inspection. Normal wear, heat damage, chemical degradation and improper use are not covered. Specific warranty terms are confirmed per order based on product type and quantity.

Q: Do you offer private label / OEM?

A: Yes. We support OEM and private label for bulk orders: custom logos on glove cuffs and boot shafts, custom packaging, custom carton marks and branded labels. Provide authorized artwork and we confirm placement does not cover safety-critical areas. Minimum quantities for custom marking vary by product.

Q: How do I choose between leather and synthetic gloves?

A: leather gloves offer better heat resistance and durability for firefighting, while synthetic gloves (nitrile, neoprene) provide better chemical resistance and dexterity for industrial and medical use. Consider the primary hazard when choosing.

Q: What is the difference between examination and surgical gloves?

A: Examination gloves are for general medical use and patient contact, while surgical gloves have stricter quality control, are sterile, and provide better tactile sensitivity for surgical procedures. Both are available in nitrile and latex.

Q: Can I mix different glove types in one bulk order?

A: Yes, you can mix firefighting, rescue, chemical, and medical gloves in one container order. We recommend specifying the quantity ratio for each type and size, and we can pack them separately for easy distribution.

Need Wholesale Hand and Foot Protection? Contact YRF China PPE Supplier for Bulk Quote

For wholesale hand and foot protection procurement, working with an experienced supplier ensures access to certified products, flexible customization, and reliable global delivery. Contact our team for project-specific quotations and configuration support.